Vincent Motorcycles, “the makers of the world’s fastest motorcycles”, began with the purchase of HRD Motorcycles, less the factory premises, by Phil Vincent in 1928.
HRD was founded by the British Royal Flying Corps (RFC) pilot, Howard Raymond Davies, who was shot down and captured by the Germans in 1917. Legend has it that it was while a prisoner of war that he conceived the idea of building his own motorcycle, and contemplated how he might achieve that. It was not until 1924 that Davies entered into partnership with E J Massey, trading as HRD Motors. Various models were produced, generally powered by JAP (JA Prestwich Industries) engines.
Unfortunately, though HRD motorcycles won races, the company ran at a loss, and in January 1928 it went into voluntary liquidation. The company was initially bought by Ernest Humphries of OK-Supreme Motors for the factory space, and the HRD name, jigs, tools, patterns, and remaining components were subsequently offered for sale again.
Main article: Phil Vincent
Philip Vincent was advised to start production under an established name. He had built a motorcycle of his own in 1924, and in 1928 had registered a patent for a cantilever rear suspension of his own design. In 1928 Philip Vincent left Cambridge University with an engineering degree and, with the backing of his family wealth from cattle ranching in Argentina, acquired the trademark, goodwill and remaining components of HRD from Humphries for 450.
The company was promptly renamed Vincent HRD Co., Ltd and production moved to Stevenage. The new trademark had “Vincent” in very small letters above “HRD” written large. After World War 2 Britain had an export drive to repay its war debts, and the USA was the largest market for motorcycles, so in 1949 the HRD was dropped from the name to avoid any confusion with the “HD” of Harley Davidson, and the motorcycle became The Vincent.
In 1929 the first Vincent-HRD motorcycle used a JAP single-cylinder engine in a Vincent-designed cantilever frame. The earliest known example extant exists in Canberra, Australia. Some early bikes used Rudge-Python engines. But after a disastrous 1934 Isle of Man TT, with engine problems and all three entries failing to finish, Phil Vincent (with Phil Irving) decided to build their own engines.
Phil Vincent also experimented with three wheeled vehicles, amphibious vehicles, and automobiles. In 1932 the first 3-wheeler, “The Vincent Bantam” appeared, powered by a 293 cc SV JAP or 250 cc Villiers engine. It was a 2.5 cwt delivery van with a car seat and a steering wheel. The Bantam cost 57-10-0 and the windscreen and hood option cost 5-10-0. Production ceased in 1936.
Main article: Phil Irving
In 1931 Phil Irving joined Vincent as chief engineer. His first engine design was an OHV 500 cc single-cylinder engine in 1934. The standard motor was known as the Meteor and the sports motor was the Vincent Comet; it was distinguished from earlier Vincent models of that name by the eries-A prefix. There was a TT replica & the Comet Special (basically a TTR with lights, horn etc), which used a bronze head. The Meteor motor produced 26 bhp (19 kW) @ 5300 rpm,
An unusual feature of the valve design for these motors was the double valve guides, and the attachment of the forked rocker arm to a shoulder between the guides, to eliminate side forces on the valve stem and ensure maximum valve life under racing conditions.
The Series-A Comet could do 90 mph (140 km/h), but Phil Vincent and his racing customers wanted more.
1936 Series A Rapide
Main article: Vincent Rapide
Legend has it that Irving accidentally put a side-view tracing of the Vincent 500 motor wrong way up on top of an equally sized drawing of the same view of the same motor, and saw, moving the tracing so the crankshafts and idler gears coincided, that the result looked like a possible design for a V-twin. This resulted in the 47.5 V twin which appeared in 1936. (The single leaned forward 23.75.)
With 6.8:1 compression, it produced 45 bhp (34 kW).
The Vincent V-twin motorcycle incorporated a number of new and innovative ideas, some of which were more successful than others.
The Vincent HRD Series A Rapide was introduced in October 1936. Its frame was of brazed lug construction, based on the Comet design but extended to accommodate the longer V twin engine. It continued the use of “cantilever” rear suspension, which was used on all Vincents produced from 1928 through 1955. Other innovations included a side stand.
Pneumatic forks were not to be a Vincent innovation, with both Phils believing girder forks were superior at the time. The Series-A had external oil lines and a separate gearbox.
The 998 cc Series A Rapide Vincent cost $600, produced 45 hp (34 kW), and was capable of 110 miles per hour (180 km/h).
The high power meant that the gearbox and clutch did not cope well.
Engine – 998 cc, 47.5 degree v-twin ohv four-stroke
Bore and Stroke – 84 x 90 mm
Compression Ratio – 6.8:1
Power – 45 bhp (34 kW) @ 5500 rpm
Produced – 1936-1939
Wheelbase – 58.5inch
Dry Weight – 430 lb (200 kg)
Carburettor – 1.0625inch Amal
Gearbox – Burman 4 speed, triplex chain primary, wet multiplate clutch
Frame – Brazed lug duplex tubular cradle. Cantilever rear springing
Front forks – Brampton girder forks
Top Speed – 110 mph (180 km/h)
World War II
In 1937 Phil Irving went to work for Velocette but returned to Vincent Motorcycles in 1943. Vincent primarily made munitions, but Vincent engines were trialled in boats and portable pumps during the war, and the end of hostilities saw Vincent ready to return to motorcycle production.
Vincent already looked to America for sales, and in 1944 Eugene Aucott opened the first USA dealership in the city of Philadelphia. Others followed.
1946 Series B Rapide
The Series B Rapide designed during the war and released to the press before end of hostilities looked radically different from the A: now the oil pipes were internal, and the gearbox was part of the engine casting (Unit Construction). The angle between the cylinders was now 50 instead of the 47.5 of the Series A engine. This allowed the use of the engine as a stressed member of the frame, which consisted of an oil-tank spine with the engine hanging below, and the front and rear suspension attached at the ends. This was considered sensational at the time, and the arrangement was not seen again till the late seventies. The cantilever rear became the most widely used form of rear suspension for motorcycles after 1980, and the use of the engine-gearbox unit as a stressed member became more usual. Brakes were dual single-leading shoe (SLS), front and rear. The 55.5-inch (1,410 mm) wheelbase was three inches (76 mm) shorter than the Series A, and its dimensions were more like a 500 cc bike of the time.
A more modern hydraulic shock absorber and spring assembly later replaced the old twin springs and friction damper. The rear seat was supported by a sub-frame down to the rear frame pivot point, providing a semi-sprung seat with 6 inches (150 mm) of suspension. (Yamaha would rediscover this suspension system nearly 40 years later.)
The Series B had a Feridax Dunlopillo Dualseat, and a tool tray under the front.
The Series “B” incorporated an inline felt oil filter instead of the metal gauze of the Series “A”.
Vincent used quickly detachable wheels, making wheel and tyre changes easier. The rear wheel was reversible, and different size rear sprockets could be fitted for quick final-drive ratio changes. The brake & gear shift were adjustable for reach to suit individual feet. The rear mud guard was hinged to facilitate the removal of the rear wheel. These are things taken for granted on modern motorcycles whereas Vincent was a pioneer in their use.
From today’s perspective, it seems incongruous that Vincent could see the need for, and design, a cantilever rear suspension, as well as incorporate so many other new ideas, yet use Brampton girder forks with friction dampers up front. The two Phils felt that the telescopic forks of the time were prone to lateral flex, so they persisted with girder forks, and did use hydraulic damping in the Series C “Girdraulic” forks. Consider now the use of similar forks on the famous Britten (from New Zealand), the current BMW K1200 Series & the Honda Rune.
Vincent had sold bikes through Indian Motorcycles dealers in the US and in 1948 an Indian Chief was sent to Stevenage to be fitted with a Vincent Rapide engine. The resulting hybrid Vindian did not go into production.
1948 Series C Vincents, “Black Shadow” and “Black Lightning”
Vincent Comet from 1950 at the Zweirad-Museum Neckarsulm
The 1948 Series C Rapide differed from the Series B in having “Girdraulic” front forks which were girder forks with hydraulic damping.
The lack Shadow, capable of 125 mph (201 km/h), and easily recognised by its black engine and gearbox unit, and large 150 mph (240 km/h) speedometer, was introduced. The engine produced 54 bhp (40 kW) @ 5700 rpm in Black Shadow trim.
The Vincent Black Lightning was a racing version of the Black Shadow, with every necessary steel part on it that could be, remade in aluminium, and anything not essential removed altogether, reducing the weight from 458 lb (208 kg) to 380 lb (170 kg). Every bit the racer, it had a single racing seat and rear-set footrests.
The 500 cc Meteor and Comet singles were introduced, along with a 500 cc racer, the Vincent Grey Flash. The Grey Flash racer used Albion gears, for the greater choice of ratios available. The 500 cc bikes used a wet multiplate clutch, while the 998 cc V-twins used a dry, drum-type servo clutch.
Most Vincents were painted black. In 1949 a White Shadow (a machine to Black Shadow mechanical specification, with the Rapide colour scheme) was available, but only 15 were sold, and the option was dropped in 1952. In 1950 16 Red Comets were shipped to the United States. There were also 31 of the 1948 Grey Flash built.
In 1949 HRD was dropped from the name, and the logo now simply said “Vincent”.
Make: Vincent HRD
Model: 1948 Series C Black Shadow
Engine: 998 cc (84 x 90 mm bore and stroke) 50 OHV V Twin, 7.3:1 CR, polished conrods
Carburetor: 2 x 1.125-inch (28.6 mm) type 29 Amals
Ignition: Lucas Magneto (1955 models: Kettering ignition)
Electrics: 6v 45w dynamo
Lubrication: Dry sump, 3 US quarts
Gearbox: Integral Vincent four speed, triplex chain primary, dry servo – drum clutch
Final Drive: 530 chain, 46/21 sprockets
Tyres: 3 x 20 in front, 3.50 x 19 in rear
Wheels: Front: 1.65 x 20 in.steel rim; Rear: 1.65 x 19 in.steel rim.
Frame: “Diamond Frame”.(Spine frame with engine as stressed member)
Rear Suspension: Cantilever rear springing
Front forks: Vincent Girdraulic forks, 3″ travel
Brakes: Twin drums, 7 in diameter in front and rear, single leading shoe 7/8″ wide.
Weight: 455 lb (206 kg) – 206 kg Wet – 500 lb (227 kg)
Wheelbase: 55.5 in. (1415 mm)
Seat height: 32.5 in. (826 mm)
Performance: 125 mph / 201 km/h – 55 bhp (41 kW) at 5500 rpm
Fuel Capacity 3.5 gallons / 16 litres
Manufacturer: The Vincent-HRD Co. Ltd., Great North Road, Stevenage, Herts
1954 “Series D” Vincents
The term “Series D” was not used by the factory, but was taken as a natural progression by the motorcycling world. With sales falling, Vincent tried building two new high-speed touring models; the fully enclosed Vincent Victor (an upgraded Comet), the Black Knight (an upgraded Rapide) and the Vincent Black Prince (an upgraded Shadow). They were poorly received by the public. A short-lived unfaired version of the Black Prince was then produced. There was still a Series D Comet. BTW. Russell Wright got the World Land Speed Record at Swannanoa with a Vincent HRD motorcycle in 1955 at 184.83 m.p.h.
Sales declined further after the post war motorcycling boom owing to the availability of cheaper motor cars, so not many “Series D” models were made.
Fireflies, Three Wheelers, and NSU
The Firefly was a 45 cc “clip on” engined bicycle built from 1953 to 1955 under licence from Miller, who were suppliers of electrical components to Vincent. It was also known as the Vincent Power Cycle. The Vincent Owners Club was predictably surprised by this new, cheap, entry-level Vincent.
By 1954, Vincent Motorcycles was in an increasingly difficult situation. In the quest for solvency, Vincent looked for ways to improve their position. The trike idea was revived. In 1932 the first 3-wheeler, “The Vincent Bantam” was first introduced. Powered by a 293 cc SV JAP or 250 cc Villiers engine, it was a 2.5 cwt delivery van which used a car seat and steering wheel rather than the standard motorcycle saddle and handlebars. The Bantam was priced at 57-10-0 with a windscreen and hood available for an additional 5-10-0. It ceased production in 1936 the first year of the Series A motorcycle.
In 1954/1955, due to falling sales of motorcycles, a one-off prototype 3-wheeler powered by a Vincent Rapide 998 cc engine was unofficially named “Polyphemus”. To keep development and production costs low, it used a parts bin-approach, including pieces from Vincent motorcycles, as well as wheels which came from a Morris Minor and a body based on the materials used in the Black Knight/Prince. With the standard Rapide engine the “Polyphemus” could reach 90 mph (140 km/h), and one reached 117 mph (188 km/h) with a Black Lightning engine in 1955.
After several more prototypes the then-named incent 3-wheeler was offered to the public in 1955 at 500 a high price for any vehicle at the time (the BMC Mini launched four years later for 497), especially for a vehicle with no reverse gear, self starter or hood. Vincent sold none.
Unfortunately Vincent motorcycles were hand-built and expensive – only a total of 11,000 machines were sold post-World War Two. A sales slump in 1954 forced the company to manufacture NSU mopeds. Only forty of the two stroke 1955 NSU-Vincent Fox 123 cc were built. There was also an OHV four-stroke NSU-Vincent 98 cc, and Vincent also sold the “NSU Quickly” moped; too well it appears (selling about 20,000 in one year a foot note to how the market had changed again), as NSU took control of its own sales after a year.
The Last Vincent Motorcycle
At a Vincent Owners’ Club dinner in the summer of 1955, Phil Vincent announced that the company could no longer continue in the face of heavy losses and that production of motorcycles would cease almost immediately.
In 1955, one week before Christmas, the last Vincent came off the production line and was promptly labeled “The Last.”
The factory then turned to general engineering, the manufacture of industrial engines, and there was the Amanda water scooter, possibly the first personal watercraft. A Vincent engineer lost his life testing it, drowning at sea.
Vincent tried for a government contract supplying motors for the ML Aviation U120D target aircraft. The motor had to be capable of passing prolonged full power operation tests. This was called the Picador project. The Vincent motor was upgraded with a better crankshaft, Scintilla magneto, double speed oil pump and fuel injection. They did not get a contract. (Russel Wright’s record breaking bike was fitted with a Picador crank and oil pump, by Vincent, while in England for Earls Court, shortly after the 1955 record attempt.)
The company went into receivership in 1959. It has since been bought and sold by other engineering firms. In 1955 Phil Vincent declared that Vincent parts would always be available and indeed they are still available, through the The Vincent H.R.D. Owners Club, The VOC Spares Company Limited, Vin Parts International and other sources.
The Vincent Owners Club is the largest single-brand motorcycle club in the world. Vincents are among the most desirable of motorcycling classics. A Black Lightning, in immaculate condition, can bring $125,000.
Vincent engines have been fitted to other frames. The most obvious is the Norvin, using a Norton Featherbed frame, with or without the lower frame tubes. The Norvin is made in the UK by Hailwood Motorcycle Restorations Specialist frame manufacturers also made frames for the Vincent engine.
Fritz Egli, a specialist frame manufacturer based in Switzerland, produced an Egli-Vincent, and around 100 were produced between 1967 and 1972. Egli-Vincents are now being built under licence in France by Patrick Godet. Non authorized copies (by Fritz Egli) are also proposed in the UK by Hailwood Motorcycle Restorations (HMR)and JMR.
In 1996, a partnership was formed to launch the Australian RTV motorcycle. It used a slightly modernised reproduction Vincent engine in an Egli-style frame in capacities of 1000 cc and 1200 cc. They had electric start. After four bikes were built, the company went into voluntary liquidation towards the end of 1998.
Vincent Motors USA founder and president, Bernard Li, acquired the Vincent trademarks in 1994, and formally launched Vincent Motors USA in 1998, spending about $2 million building prototypes that resemble the original Vincent, but utilising modern components, like the Honda RC51 V-twin engine. Vincent Motors is based in San Diego. A resurrection of the Vincent name now seems unlikely as the Honda engine now out of production, and Li was killed in a motorcycle accident.
List of Vincent motorcycles
Vincent Black Shadow
H.R.D. Motor Cycles. Produced by a Rider Auth: Geoff Preece; Publisher: J. Bickerstaff
Vincent Motorcycles: The Complete Story, David Wright Pub: Crowood Motoclassics, ISBN 1-86126-516-6
Vincent and HRD Motorcycles – How They Were Promoted and Sold’, David Wright, Limited edition of 998 copies
^ Ward, Ian (in English). Great British Bikes. Macdonald & Co. ISBN 0-7481-0020-2.
^ a b 3Wheelers Vincent Three Wheelers (Retrieved 22 October 2006)
^ VincentMotors History (Retrieved 22 October 2006)
^ NTNOA Histories (Retrieved 22 October 2006)
^ Dropbears Histories (Retrieved 22 October 2006)
^ IanChadwick Vincent (Retrieved 22 October 2006)
^ TheVincent Models and Fittings (Retrieved 22 October 2006)
^ Is-it-a-lemon Vincent review (Retrieved 22 October 2006)
^ The Vincent Grey Flash Information (Retrieved 22 October 2006)
^ Vincent production figures
^ Globalnet Vincent Firefly (Retrieved 22 October 2006)
^ The History of Mini – MiniWorld
^ VincentMotors History Page3. (Retrieved 22 October 2006)
^ IanChadwick Vincent (Retrieved 22 October 2006)
^ MindSpring 1953 Works Visit (Retrieved 22 October 2006)
^ The Vincent Picador Drone (Retrieved 22 October 2006)
^ Hailwood Motorcycle Restorations HMR Norvin (Retrieved 3 July 2007)
^ GodetMotorcycles Egli (Retrieved 22 October 2006)
^ Hailwood Motorcycle Restorations HMR Egli-Vincent (Retrieved 22 October 2006)
^ UnionJack RTV Vincent (Retrieved 22 October 2006)
^ Vincent Motors San Diego (Retrieved 22 October 2006)
^ Bernard Li, 1946-2008 (Retrieved 11 November 2008)
Vincent Motors USA
Hunter S Thompson article on the Vincent Black Shadow
Listen to Richard Thompson’s song Vincent Black Lightning 1952
Vincent Motors history, Motorcycledaily.com
v d e
British motorcycle manufacturers
AJS Broom Development Engineering CCM Greeves Megelli Mtisse Norton Triumph
ABC (19191923) Abingdon (AKD) (19031925) Advance (19051947) AER (19371940) Ambassador (19461964) AJW (19281976) Ascot-Pullin (19281930) AMC (19371966) Ariel (19021970) Armstrong (19801987) Baker (19271930) Bat (19021926) Baughan (19201936) Beardmore Precision (19141930) Blackburne (19131922) Bradbury (19021924) Brough (19081926) Brough Superior (19191940) BSA (19191972) Calthorpe (19091939) Chater-Lea (19001936) Clyno (19091923) Corgi (1946-1954) Cotton (19181980) Coventry-Eagle (19011939) Coventry-Victor (19191936) DMW (19451971) DOT (19081978) Douglas (19071957) Dunelt (19191935) Duzmo (19191923) EMC (19471977) Excelsior (18961964) Francis-Barnett (19191966) Greeves (19531976) Haden (19121924) Healey (19711977) Hesketh (19811988) Humber (18981930) HRD (19221928) Ivy (19111934) James (19021966) JAP (19031939) Levis (19111939) Martinsyde (19191923) Matchless (18991966) Montgomery (19021939) Ner-a-Car (19211926) New Hudson (19031958) New Imperial (19011939) Norman (19351963) Norton-Villiers (19661972) Norton Villiers Triumph (19721978) NUT (19121933) OEC (19011954) OK-Supreme (18821940) P&P (19221930) Premier (19081921) Panther (19041967) Quasar (19751982) Quadrant (19011928) Raleigh (18991967) Rex-Acme (18991933) Rickman (19601975) Rover (19021924) Royal Enfield (1893-1971) Rudge (19111946) Scott (19081965) Silk (19761979) Singer (19001915) Sprite (19641974) Sun (19111961) Triumph (18851983) Sunbeam (19121964) Velocette (19041968) Villiers (1898-1966) Vincent-HRD (19281959) Wilkinson (19111916) Wooler (19091954) Zenith (19051950)
Categories: British brands | Companies established in 1928 | Motorcycle manufacturers of the United Kingdom | Defunct motor vehicle manufacturers of the United Kingdom